Open

Exploring the Dashboard

The purpose of the dashboard

The dashboard is meant to give you a high-level overview of key analytics for your loaded data.

As you use the controls, you will see the data update in real-time.

Dashboard Widgets

Open

This widget tells you how long it takes for you to deliver your work (in days) for the 4 different percentiles of cases. This should be reflective of all the cycle time percentile lines on the Cycle Time Scatterplot chart when using the same filters.

Be aware that you can control what this chart reflects by using the filter controls for this chart. 

• The chart will include all of your data that's been loaded in unless you use the item filter control.

• This cycle time reflects how long it took for work from entering the first checked workflow stage to exiting the last checked workflow stage in your Workflow Stages control to the right.

This widget tells you how many items are in your workflow (aka in progress) right now.  This should be reflective of the number of items that are shown on the Aging Work In Progress chart when using the same filters.

Be aware that you can control what this chart reflects by using the filter controls for this chart. 

• By using the item filter control you can filter down to a specific set of items

• By using the workflow stages control, you can choose to show the number of items in a subset of workflow stages.

The Pace: Start vs Finish chart provides information about it in the same way as the arrival and departure rates. Start is the arrivals each day. Completed is the Throughput but with monthly actuals instead of averages.

To get the average arrival rate and average throughput of the data through to today (like we had in the original dashboard), you can go to summary statistics on the CFD and grab the information in the system line there.

The WIP & WIP age chart tells you the total age, average age, and WIP level for each day over time. This line chart shows the change over time and reduces the need for manual work. The last point on this chart should reflect today.

This is actually a lot more useful than an average of your whole data set and tells you a much better picture of your changes in risk over time.

Be aware that you can control what this chart reflects by using the filter controls for this chart. 

• By using the item filter control you can filter down to a specific set of items

• By using the workflow stages control, you can choose to show the number of items in a subset of workflow stages.

This widget should show information similar to that in the Summary Statistics dialog box in the Cumulative Flow Diagram chart when using the same filters

This widget tells you how many items can be finished in 30 days with different degrees of certainty.  The image above is saying that there's an 85% chance that 66 items or more will be completed in 30 days. This should be reflective of what you'd see in the Monte Carlo: How Many chart when using the same filters.

Be aware that you can control what this chart reflects by using the filter controls for this chart. 

• By using the item filter control you can filter down to a specific set of items

• By using the workflow stages control, you can redefine what completed means by unchecking workflow stages from the bottom of the list. Removing workflow stages from the top of the list does not affect the calculations. 

Dashboard Controls

Date Range

Item Filter

You can filter down the dots shown on this chart by choosing one or more available filters. 

If you want to clear your filters so that all data is portrayed again, click the Reset button.

Workflow Stages

Use this control to refine the portion of the process that is used for the dashboard. Each widget may use this information differently depending on how the chart is based on works.